Call (07) 3523 1792

Servicing Brisbane, QLD.

Call (07) 3523 1792

Resin injection underpinning Brisbane: what to check before you choose a method

By Artigellence ·

Whether resin injection underpinning suits your Brisbane house depends on what is moving the footing, so get the cause diagnosed before you pick a method. CSIRO says cracking from local shear or erosion will usually keep developing until the original cause has been remedied. Brisbane City Council says building approval is needed for filling or excavating more than 1 vertical metre, which is worth knowing when any underpinning quote involves digging.

Call (07) 3523 1792
A red laser line running level across a timber-panelled wall past a panelled door that sits with a dark gap along its head — crack repair, Brisbane. Illustrative example.

Find the cause before you compare methods

People searching for resin injection underpinning in Brisbane have already noticed something: a crack, a sticking door, a floor that seems to have dropped. The temptation is to ask which repair method is best. The better first question is what is making the ground or footing move, because a repair that ignores the cause tends to leave you with the same problem later.

CSIRO's guidance on footing performance puts it plainly. Where movement comes from local shear or erosion, cracking will usually continue to develop until the original cause has been remedied. That applies whichever method ends up being used, resin or otherwise.

Diagnosis is harder than it looks. CSIRO notes that the visible symptoms do not simply reflect the original cause, so the crack you can see may be some distance from the real problem.

Water is often the culprit

On clay soils, moisture is a common driver. CSIRO says even a minuscule leak can be enough to saturate a clay foundation, and that a leaking tap near a building can have the same effect.

It also names overwatering from misused automatic watering systems as a common cause of saturation and water migration under footings. Before paying for any underpinning work, it is sensible to check taps, pipes, drainage and sprinkler timers, and to ask whoever inspects your house whether water could be involved.

How worried should you be about a crack?

Not every crack means the footings have failed. CSIRO says that in general, most cracking found in masonry walls is a cosmetic nuisance only. The same document says monitoring of cracks in walls and floors should always be treated seriously, so a crack is worth measuring and photographing with dates rather than ignoring.

Doors give a clue as well. CSIRO lists binding of doors on the vertical member of the frame as a common symptom of movement. On older houses with isolated piers, it warns that piers affected by erosion or saturation will eventually lose contact with the bearers they support and may tilt or fall over. If you see that kind of change, move the inspection up your list.

Who should assess it

CSIRO states that remediation of footings and foundations is generally the realm of a specialist consultant. It also says soil classification is generally provided by a geotechnical report. In practice, that suggests asking for a written assessment of the cause and soil, not just a quote for one preferred method.

If anyone proposes digging beside the footings, CSIRO adds that excavation around footings must be properly engineered, and that removing soil within the angle of repose will cause subsidence. A contractor should be able to explain how any proposed work avoids that.

What Brisbane City Council says about approval

Council rules matter when work involves earthworks. Brisbane City Council says you will need building approval if you intend on filling or excavating more than 1 vertical metre of land for the purpose of constructing a building or structure. Its filling and excavation guideline also says such activities are classed as building work when they are directly related to underpinning, among other building tasks.

Council also says some neighbourhood plans and overlays affect how much filling or excavation can occur without planning approval, and it directs people to contact a licensed building certifier to organise building approval. Whether a particular resin injection job needs any approval is a question for the certifier and your assessor, since these sources do not address resin injection specifically.

To see how this site describes the method and what to ask, read the resin injection page.

Artigellence is the marketing business that operates this site and writes its articles. It does not carry out the work described.

Resin injection

Call (07) 3523 1792

Request a free quote

Last reviewed · Updated · First published